Model Type |
JD-FAI980/980S |
Circuit board detected |
Circuit board in front of the SMT furnace (solder paste board, paste board and red gum board) |
Detection method
|
Visual inspection of air paste position |
|
As for resistance, capacitance and inductance, the LCR bridge measurement is used |
|
As for IC and audion, the automatic optical character checking is used. |
|
The diode polarity can be distinguished and LED can be turned on |
|
The average detection speed is 3s/element in accordance with the operator's proficiency, and the solder paste board is slow |
Scanner
|
Professional HD linear CCD scanner |
|
The highest definition: 600DPI~4800DPl |
|
The average scanning speed is 30s/PCS based on the PCBA size |
LCR bridge |
Test frequency: 20Hz~300KHz
|
|
Minimum measurement of R/C, R: 0.05Ω: C: 0.1pF |
|
Basic precision: 0.05% |
|
Measuring display scope: R: 0.01m ohms-99.9999M ohms L: 0.01nH~9999.9HC:0.00001pF~9.9999F The testing software automatically controls the selection of measuring gear and parameters |
Programming mode
|
Quickly importing BOM form and XY coordinates as well as matching with the scanning pattern |
|
Automatically extracting the element specification information from material |
|
Supporting two-sided coordinate import and selecting one side for detection |
|
Automatically identifying and marking the air paste position |
|
Interception by the box for optical character detection |
Type covered by the detection |
Data: BOM dosage error, position repetition, no definition of XY coordinates and multiple definitions |
|
Circuit board: Excessive pasting, missing parts, wrong parts, reverse direction, rollover, excursion and rotation |
SPC process control
|
The test data is recorded in the whole process and the Excel and PDF reports can be output |
|
The test scenarios can be restored in the later period and the traceability basis is provided |
Server mode |
The central data base is used and the centralized and unified management for the data of multiple FAI data can be conducted |
Inspection result display |
23 inches of LCD and OK/NG sound and light hin |
PCB size range
|
Maximum: 420mm x 310mm (the larger size shall be customized) |
PCB± lower clear height |
PCB upper part: 28mm PCB lower part 50mm |
Voltage and power |
AC220V 50/60HZ less than 1.5KVA |
Equipment weight |
About 230KG |
Boundary dimension |
1160mm x 800mm x 1100mm (W*D*H) |
Ambient temperature |
10~35°C |
Humidity |
35 -80% (no moisture condensation) |
Equipment safety specification |
Compliance with CE safety standards |